Pricing

Oil Service: Drain and refill engine oil. Filter Maintenance: Replace oil and fuel filters. Air System: Inspect air filter (replacement subject to additional cost). Chassis & Drive: Grease machine and tighten wheels. Cutting Deck: Sharpen blades and scrape deck. Systems Check: Inspect drive belt and ignition system. Ignition: Replace spark plug. Note: All parts are billed separately from labor.

Fluid Service: Change engine oil, oil filter, and fuel filter. Ignition & Electrical: Replace spark plug and inspect ignition system. Chassis & Mechanical: Grease all points and tighten wheels. Cutting Deck: Sharpen blades and scrape deck. Air System: Inspect air filter (replacement subject to additional cost). Note: All parts are billed separately from labor.

Engine & Fluids: Change engine oil, oil filter, and fuel filter. Ignition & Fuel System: Replace spark plug, inspect ignition system, and perform a visual inspection of the fuel system. Air System: Inspect air filter (replacement subject to additional cost). Chassis & Tires: Grease machine, tighten wheels, and check tire pressure. Drive System: Inspect all drive belts and adjust tension if necessary. Cutting Deck: Sharpen blades and scrape deck. Note: All parts are billed separately from labor.

Engine & Fluid Service: Change engine oil, oil filter, and fuel filter. Ignition & Fuel System: Replace spark plug, inspect ignition system, and perform a visual fuel system inspection. Air System: Inspect air filter (replacement parts billed additionally). Chassis & Traction: Grease machine, tighten wheels, and adjust tire pressure. Drive & Belt System: Inspect all drive belts and perform tension adjustments if necessary. Cutting Deck: Sharpen blades and scrape under-deck. Hydraulic Systems: If the equipment is a hydraulic-driven machine, additional charges may apply. Note: All parts are billed separately from labor.

Engine & Fluid Service: Change engine oil, oil filter, and fuel filter. Ignition & Fuel System: Replace spark plug, inspect ignition system, and perform a visual fuel system inspection. Air System: Inspect air filter (replacement parts billed additionally). Chassis & Traction: Grease machine, tighten wheels, and adjust tire pressure. Drive & Belt System: Inspect all drive belts and perform tension adjustments if necessary. Cutting Deck: Sharpen blades and scrape under-deck. Hydraulic Systems: If the equipment is a hydraulic-driven machine, additional charges may apply. Note: All parts are billed separately from labor.

Engine & Ignition: Change engine oil and replace spark plugs. Fuel & Air Systems: Visually inspect the fuel system and inspect the ignition system. Controls & Calibration: Adjust throttle cable and inspect/adjust all drive belts as necessary. Chassis & Lubrication: Grease machine, grease all linkages, and fill the gear box. Tire Maintenance: Check and adjust tire pressure. Note: All parts are billed separately from labor.

Engine & Fluids: Perform oil change and lubrication service. Ignition: Replace spark plug. Air System: Clean air filter (replacement parts subject to additional cost). Note: All parts are billed separately from labor.

Engine & Fluids: Change engine oil, oil filter, and fuel filter. Air & Ignition: Inspect ignition system and air filter (replacement parts subject to additional cost). Chassis & Mechanical: Grease machine and tighten wheels. Note: All parts are billed separately from labor.

Engine & Fluid Service: Change engine oil, oil filter, and fuel filter. Ignition & Electrical: Replace spark plug, inspect ignition system, and clean battery terminals. Fuel System: Perform a visual inspection of the entire fuel system. Air System: Inspect air filter (replacement parts subject to additional cost). Chassis & Tires: Grease machine, tighten wheels, and check tire pressure Note: All parts are billed separately from labor.

Engine & Fluid Maintenance: Change engine oil and filter, and check the fuel filter. Cooling System: Clean radiator cooling fins and screens; check coolant level and freeze protection. Air Intake: Detailed inspection of both inner and outer air filters. Electrical & Starting: Perform a battery load test and check both the starting and charging systems. Hydraulics & Drive: Check hydraulic system oil level and condition; check gearbox oil. Chassis & Lubrication: Grease machine and adjust tire pressure. Safety & Attachments: Check machine safety systems and inspect loader (if applicable). Lighting: Full check of all machine lights and indicators. Note: All parts are billed separately from labor.